Digital Panel Meters

W2040 W2550 W3600
2410 W3100 W3700
2420 W3200 W5000
W2425 W3300 W5600/W5700
W2430 W3400 W5228/W5248/W5249
W2470 W3500 WLINK & ISC
2010 D3100 D3900
2020 D3200 4000A
D2040 D3300 D5000
2600 D3400 D5228/D5248/D5249
2700 D3500 D5600/5700
2780 D3600    
2800 D3700    

W2040
Loop Powered DPM


Download

Digitec's Model D2040 is a low-cost, short depth digital panel meter with LCD redout. The meter is powered by the current being measured and has selectable full scale input ranges of 20mA and 50mA. User adjustable scale (gain), offset and decimal point allow immediate calibration of measurement being displayed.

31/2-Digit full-size LCD 0.6" high
Small size: 2.3" × 4.13" × 1.25"
Fits 1/8 DIN cutouts
Only 1.25" required behind the panel
Programmable decimal point
Powered by the current being measured (less than 3.2 volt drop with 20mA input current)
Connectors Included
Non-interactive potentiometer setup for scale (gain) and offset.
Two (2) wires for total hook-up
Made in USA
Easily scaled to desired display using potentiometers
NEMA 4X

Back to top

 

W2410 Series


Download

The 2410 is a low cost, short depth digital panel meter with a highly visible LED readout. The 3½ digit DC voltmeter is a single range, bipolar. The meter is powered by an external +5VDC supply and has selectable full scale ranges from 200mV to 1000V. The 2410 can also be configured as a DC current meter with full scale ranges from 2mA to 2A.

The 2410 brings unprecedented reliability and accuracy to the low cost digital panel meter market, UNDER $80.00. For the first time, a low cost meter is backed by Westcon’s outstanding technical support and commitment to customer service. The 2410, the right meter at the right price.

3½ digit full-size LED, 0.56" high
Small size 1.9" × 4" × 1.115"
Only 0.5" required behind the panel
Auto-zeroing
Fits 1/8 DIN cutout
Programmable decimal
+5 VDC power
Connector included
Made in the USA

Back to top

 

W2420 Series


Download

The 2420 is a low cost, short depth digital panel meter with LCD readout. The meter is powered by the current loop being measured and has selectable full scale range of 4-20mA and 10-50 mA. User adjustable scale (gain), offset and decimal point allow immediate display in the engineering unit of the input being measured.

3½ digit full-size LCD, 0.6" high
Small size 1.9" × 4" × 1.115"
Only 0.5" required behind the panel
Fits 1/8 DIN cutout
Programmable decimal
Powered by the current being measured (less than 3.2 volt drop with 20mA input current)
Connector included
Non-interactive potentiometer setup for scale (gain) and offset
Two wires for total hook-up
Made in the USA

Back to top

W2425 Series


Download

Here is a full function DPM from the name that pioneered dual slope A/D conversion. The Model 2425 takes advantage of the latest IC technology, resulting in a high quality meter priced as much as 35% below standard models.

3-½" Digit LED Display
10 Available Functions
Field Modifiable
1/8" DIN case
Quality components
Rugged Construction

Back to top

W2430 Series


Download

The Series 2435A/2436A is a family of 3½-digit LED display, single-range, line-powered panel meters offering a wide selection of standard ranges and functions. The basic instruments measure DC volts in four ranges from 200mV to 200VDC. The basic (DCV) meters are stocked at local distributors, as well as standard

LED Display
0.05% Accuracy — on all ranges.
Four Basic DCV Ranges — 200mV - 200V
Standard Option Kits offer hundreds of
configurations
Ratiometric Option, at a reference voltage of
1.00V ±20%
0° - 65°C Operation
Auto-zero — automatic zero and polarity eliminate zero calibration adjustment and allow direct reading of + and - input signals.
“True Bipolar” Integration — eliminates dead zone around zero, no skewing.
Universally Powered — 115/230VAC ±15% with 500 VRMS isolation.
BCD Output Option — 8-4-2-1 parallel latched.
3 Output Voltages to Power Auxiliary Circuits: +5V@25mA; -5V@25mA; +5V@60mA
3 Different Reading-Rate Capabilities — 3 rdg./sec. (standard); 7.5 or 15 rdg./sec. (Optional).

Back to top

W2470 Series


Download

The Weston 2470 Series are a family of 4½-digit, high-accuracy, line-powered, single-range panel meters. The series offers a high-brightness LED displays with five DC ranges from 20mV full scale with 1µV resolution, to 200V full scale with 10mV resolution.

All models provide automatic zero calibration, accuracy of ±0.005% rdg ±2 digits, and an auxiliary power supply output of ±12VDC or + 5VDC. Options include a parallel-BCD output with 200V RMS isolation (Models 2472) as well as direct readout in engineering units such as psi, pH, °C, or oF (all models). Any model may be adapted to 4-20mA current-Ioop and 1-5V voltage loop data transmitters.

Accuracy: ±0.005% rdg ±2 digits
±1 Count Stability at zero over the full operating
temperature range.
LED — Models 2471 and 2472 provide high-brightness, 0.56" high LED display.
Fast Warm Up Time —temperature controlled zener voltage reference eliminates temperature shifts.
Direct Readout in Engineering Units — psi, pH, °C, °F, or other options.
Isolated, Parallel BCD Output — available in Models 2472.
Four Current Ranges: — 200µA to 200mA
Three Auxiliary Power Supply Outputs — ±12VDC or +5VDC for driving external circuits.
Automatic Zero and Polarity — eliminates calibration adjustments and allow direct readings of + and - signal inputs.
Low Power Consumption — Special circuit design provides cool running operation in industrial environments.
Low Noise — Patented Westcon Dual Slope Integration provides excellent noise rejection.
Ratiometric Operation optional.

Back to top

W2550 Series


Download

The 2550A series is a versatile, microprocessor-based digital meter that is well suited for a wide range of OEM applications. The software features a fully prompted setup routine in which you can enter two high and two low setpoints, hysteresis (deadband) value, offset and scale values, and placement of the decimal point. The meter will accept any standard industrial voltage or milliamp input.

User-programmable via improved front panel membrane keypad
Front panel scale and offset converts voltage or current inputs to engineering units.
Inputs include DC voltage and current, process monitor (all standard input ranges), thermocouple (1 degree or 0.1 degree resolution), and strain gauge
Dual high and low setpoints with adjustable hysteresis
Available in 3½, 4 and 4½ digit models
Non-volatile memory protects setup data even when power is off
High and low readings stored and displayed at the touch of a key
Continuous self-calibration keeps readings stable and accurate
Gasketed front panel provides an oil-tight seal
Edge connector standard
Security code protects user input, prevents unauthorized use
Compact 1/8 DIN case
Options: dual 5 amp relays, RS232C serial communications, analog output and 10VDC excitation supply.

Back to top

W3100
Explorer Series


Download

The Explorer W3100 Series is a low priced family of digital panel meters for industrial or laboratory measurement. These meters are standard with scaling, relay outputs, analog output, excitation and screw terminal connectors.

The meter display is a 3½-digit or 4½-digit resolution LED display. This family of meters can measure all common transducer outputs. There are seven models to choose: Process, RTD, Thermocouple (J & K), Strain Gage, AC (average), AC (RMS) and DC voltage/current models.

Bright and long lasting LED display – available in Red or Green (optional).
2 relay outputs.
4 – 20mA or 0 – 10V analog output
Front of instrument is drip proof and is dust tight.

Optional NEMA 4 (IP65) cover is available

Plug-in screw terminal connectors that accept wire up to 14 ga.
Adjustable for spans of 200(0) to 1999(9) counts
Offsets are adjustable to +/-100(0) counts around zero
Slot on inside of front panel for displaying unit of measure from furnished decal sheet
Excitation supplies of 10 Volt DC @ 120mA, maximum of +24 Volt @ 50mA (user selectable) standard on Strain Gage and Process Models

Back to top

W3200
Voyager Series


Download

Features
5 digit, -19999 to +20999 red LED display
Display can be user programmed for 3½, 4 or 4½ digits
Microprocessor controlled A/D
Four front panel annunciators to display alarm status or status indicators for selectable functions

Universally powered from 100 to 132VAC, 200-264VAC and 10 to 40VDC

No calculation setup for scaling and offsetting. Simply enter input and display high and low values
Display format selection of:
- decimal point
- count by 1, 2, 5 or 10
- least significant “dummy” zero
- 3½, 4 or 4½ digit display
Selection for upper and lower limits that when exceeded will cause display to flash
Programmable A/D functions of:
- Update time from 10 per second to once every 20 seconds
- Averaging of programmable 1 to 25 input reading by walking window means
- Programmable window of measurements that can be allowed in the averaging function
User configurable non-linear 17 point correction
User programmable front keys and external input assignments
Programmable alarm functions
(See Data Sheet for Specific functions)
Max./min. peak detectors with capture delay
  Second scale factor
CE Approved
Password function allows lockout of access to programming functions without knowing programmed pass number
Quick zero and span adjustment from front panel
Excitation power supply
1/8 DIN cutout
NEMA 12 rated front panel
Screw terminal connectors
Operating temperatures of –10 to +60°C
Accuracy: .01%

Back to top

W3300
Explorer Series


Download

The W3300 Series is a compliment to the W3100 Series with the W3300 being a basic display meter without relay or analog outputs. All other features, size, specifications, etc. are the same as the corresponding W3100 meter. See W3100 for specifications, feature and options.

  W3320/W3324 Series
Model W3320 has 3½ digit resolution.
Model W3324 has 4½ digit resolution.
Inputs for 4-20mA, 0-10VDC and 1-5VDC are selectable.

Standard with scaling and selectable 10VDC or 24VDC excitation supply.

  W3330/W3334 Series
Model W3330 has 1° resolution.
Model W3334 has .1° resolution.
  W3340/W3344 Series
Input is 20mV. Model W3340 with 3½ digit display and 10uV resolution.
Model W3344 with 4½ digit display and 1uV resolution.
Standard with scaling and selectable 10VDC @ 120mA and 24VDC @ 50mA excitation supply.
  W3360/W3364 Series
Model W3360 has 1° resolution.
Model W3364 has .1° resolution.
Temperature range of –148° to +1472°F (-100° to +800°C).
  W3370/W3374 Series
Standard with scaling.
See Data Sheet (click on button at left) for model/ranges:

Back to top

W3400 Series


Download

Largest LED Display Available with .8'' high characters in a 1/8 DIN Panel Meter Package. available in seven (7) different input models. also with space savings compared to other panel meters with 2.4'' behind the panel.

3½ digit full-size LED, 0.56" high
Small size 1.9" × 4" × 1.115"
Only 0.5" required behind the panel
Auto-zeroing

Fits 1/8 DIN cutout

Programmable decimal
+5 VDC power
Connector included
Made in the USA

Back to top

W3500 Series


Download

The 4 model Series W3500 offers a maximum display reading of 5 digits (up to 32000 counts). Output options for the W3500 are: 2/4 relays, or 4NPN/4PNP control outputs, and an Analog (0-10VDC/4-20mA) output signal. Also the unit offers a choice of RS-232 or RS-485 communication with (Modbus, ISO1745, or Westcon) protocol. The meter is easy to program with two types of scaling: (1) No calculation scaling (2) Load calibration. The W3500 has a standard warranty period of 3 years.

Process, Strain Gage, Temperature, Frequency
NEMA 4 certified
12 point linearization
Clamp-Wago type Terminal Connectors

Front panel programmable decimal points

Two scaling methods (by no calculation or load calibration)
Optional: 2 or 4 relay, 4 NPN or PNP outputs
Optional: RS232 or RS485 communication
Optional: Analog 4-20mA or 0-10VDC output
Available in 4 different input models:
  -Process
  -Temperature
  -Straingage
  -Counter/Freq.
4 programmable REMOTE INPUTS
Available in models powered by 115/230VAC,
  10-30VDC,24/48VAC
3 YEAR WARRANTY

Back to top

W3600 Series


Download

The Westcon W3600 Series of Low Profile Digital Panel Meters are the new 3/64 DIN compact size ideal solution for meeting the measurement and display requirements of industrial applications, OEM’s and system designers

3/64 DIN
.94" h × 2.83" w (24mm × 72mm)
-1999 to 9999 Digit, 0.56" LED Display
IP65/NEMA 4 Front Panel

Tare

Two Alarm Relay Output
85-264VAC Powered
Excitation Supplies
5/Sec Display Update Rate
Options: Analog Output, RS232 & Infrared
Remote Setup

Back to top

W3700 Series

Download

 

The W3700 series digital panel meters are the most versatile and powerful meters on the market. These meters are available as either the single channel W3720 or the dual channel W3722. The meter’s 6 digit display, high speed measurement (60/sec. update rate) makes this the perfect choice for those most demanding applications. The W3700 also includes 4 assignable front keys, 4 assignable remote inputs, user defined defaults and a variety of menu lockout features. Combine all this with its good looks, industrialized aluminum case, NEMA 4X construction, 13 indicating LEDs, and snap-action buttons and you have a meter ready for all applications.

The W3722 offers two input channels with a third channel for mathematical calculations. Standard formula includes sum, difference and product. A complete math package is in the W3700 firmware. Please contact Westcon for implementing your specific equation.

6 digit Red LED display

Peak Capture model (-02) is 10,000 readings/sec. capture rate
60/sec. Update Rate
20 point linearization
Tare gross/net operation
Dual scale setup (English/Metric)
18VDC @ 200mA excitation supply
Math channel
1/8 DIN extruded aluminum case
NEMA 4X rated front
Shunt calibration (channel 1 only)
No calculation scaling
Calibrated load scaling
User definable defaults
User programmable keys and remote inputs
Relay for alarm/shunt calibration

Back to top

W5000 Series
Large Displays

Download

 

Westcon's W5000 Series is ideal for measuring and displaying data from all applications. The NEMA 4 rating of the complete display including connectors makes it ideal for all industrial environments. The universal powered W5000 Series works off of any 95 to 265VAC supply.
Available in 2", and 4" and 6" models. Consult factory for 8" and 11" models.

Complete NEMA 4 rating
Operates off a 95 to 265VAC supply without need to re-configure
All models include a bidirectional RS485 interface
13VDC @ 50mA excitation supply

Panel, well or suspension mounting kit of users choice

2" and 4" displays are ultrabright, high efficiency and LEDs
Programming of displays is by 3 contact closures or serial input
4 selectable brightness ranges
10 year nonvolatile memory

Back to top

W5600/W5700 Series
Large Displays


Download

 

.The W5600 and W700 offer an economical alternative to the W5250 and W5300 series, for applications not requiring NEMA4 sealing. Designed for use in clean indoor environments. All settings may be adjusted remotely by way of hardwired remote pushbuttons, which activate the menu-free setup system. LED annunciator lamps on the front panel let you know which parameter you are changing and also provide visual alarm status.

Low cost, attractive styling
Dual Alarms included as standard
RS422 retransmission output
Remotely Scalable
Excitation supply included
Universal Power Supply
High noise immunity
Wall or suspension mounting
Simple to install

Back to top

 

W5228/W5248/W5249
Series
Large Displays

Download

Westcon's Marquee Displays are an economic solution to problems involving communication with workers at a distance. They can be used to display safety alerts, machine status, production counts and similar messages. They are S2 compatible devices that can operate with personal and single board computers, as well as basic or ASCII modules of programmable controllers.

Viewing Range of 125 feet for 2" tall characters, up to 275 feet for 4.5" characters
Message options include blinking, horizontal and vertical scrolling and embedded variable data.
Universal Mounting Brackets allow top, surface or suspended mounting
Units can be stacked together or mounted back to back for biderectional viewing
Communicates using our S2 Protocol via optically isolated RS232 or RS422 ports
5A, SPDT Relay Alarm Output can be used to sound siren or strobe light
Easily connect to major brands of PLC using our Communication Gateway devices (W9450/W9650)
Store and retrieve messages and message groups 115VAC Power Standard, 24VDC and 230VAC also available
MU Message Utilty Software included
W5228:
  4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)
W5248:
  4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)
W5249:
  4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)

Back to top

WLINK & ISC
Configuration Software


Downloadable files

The configuration software W Link requires a personal computer with 486 or better, a serial RS232 port and Windows® 3.1, 95/98 or NT4.0 The communication cable MCOMM with isolated adapter does not require any power supply. The software lets you prepare configurations, modify, save them as file, print them; then you can transfer them to any transmitter. W Link is a multifunction software able to configure all W3200, W3600 panel meters as well as WMTX transmitters. ATCWestcon will provide this software free of charge to all customers and you can also download the last updated version at www.atcwestcon.com

Full integrated software for W3600, W3200 panel meters and series WMTX transmitters
Input, output, display and functions configuration
Intuitive and easy to use interface
Data entry validation
Editing, printing and saving of the configuration
Input and Output signal monitoring in numerical or analog form
Windows® 3.1, 95/98 or NT freeware application requires I-S-C adapter to connect the PC to the instruments

.Back to top

 

Model 2010 Short Depth Voltage Meter

Downloadable files

The 2010 is a low cost, short depth digital panel meter with a highly visible LED readout. The 3½ digit DC voltmeter is a single range, bipolar. The meter is powered by an external +5VDC supply and has selectable full scale ranges from 200mV to 1000V. The 2010 can also be configured as a DC current meter with full scale ranges from 2mA to 2A.

The 2010 brings unprecedented reliability and accuracy to the low cost digital panel meter market, UNDER $85.00. For the first time, a low cost meter is backed by DigiTec’s outstanding technical support and commitment to customer service. The 2010, the right meter at the right price.

3½ digit full-size LED, 0.56" high
Small size 1.9" x 4" x 1.115"
Only 0.5" required behind the panel
Auto-zeroing

Fits 1/8 DIN cutout

Programmable decimal
+5 VDC power
Connector included
Made in the USA

Back to top

 

Model 2020 Short Depth Voltage Meter

Downloadable files

The 2020 is a low cost, short depth digital panel meter with LCD readout. The meter is powered by the current loop being measured and has selectable full scale range of 4-20mA and 10-50 mA. User adjustable scale (gain), offset and decimal point allow immediate display in the engineering unit of the input being measured.

3½ digit full-size LCD, 0.6" high
Small size 1.9" x 4" x 1.115"
Only 0.5" required behind the panel
Fits 1/8 DIN cutout
Programmable decimal

Powered by the current being measured (less than 3.2 volt drop with 20mA input current)

Connector included
Non-interactive potentiometer setup for scale (gain) and offset
Two wires for total hook-up
Made in the USA

Back to top

 

Model D2040 Short Depth
Loop Powered Meter


Downloadable files

Digitec's Model D2040 is a low-cost, short depth digital panel meter with LCD redout. The meter is powered by the current being measured and has selectable full scale input ranges of 20mA and 50mA. User adjustable scale (gain), offset and decimal point allow immediate calibration of measurement being dispayed.

31/2-Digit full-size LCD 0.6" high
Small size: 2.3" × 4.13" × 1.25"
Fits 1/8 DIN cutouts
Only 1.25" required behind the panel
Programmable decimal point
Powered by the current being measured (less than 3.2 volt drop with 20mA input current)
Connectors Included
Non-interactive potentiometer setup for scale (gain) and offset.
Two (2) wires for total hook-up
Made in USA
Easily scaled to desired display using potentionmeters
NEMA 4X

Back to top

 

Model 2600
Digital Panel Meter

Downloadable files

The DigiTec 2600 Series is a low-priced family of digital panel meters with outstanding features. The 2600 features a choice of 3½, 4 or 4½ digit resolution, and consists of four basic models: DC voltage and current, AC true RMS voltage and current, RTD, and Thermocouple inputs.

Microprocessor technology
Fully prompted setup and data entry through front panel keyboard
Dual high/low setpoints with user-programmable hysteresis
SelfCal™ insures accuracy by sampling a precision internal reference every four seconds
Set-up data permanently stored in non-volatile memory
Lockout code for added security

High-intensity 0.5” blue-green vacuum fluorescent display

NEMA 12 sealed front panel
Compact 1/8 DIN case, 45mm x 92mm cutout
Input/Output connectors supplied
Dimensions: 2" (50.8mm)H x 3.83" (97.3mm)W x 5.36" (136.1mm)D

Back to top

Model 2700
Digital Panel Meter

Downloadable files

A complete line of 3½ (2770A) and 4½ (2780A) digit DPMs for accurate measurement and display of a wide variety of analog input signals.

Voltage and current
Process signals scaled to display in engineering units

Back to top

 

Model 2780
Digital Panel Meters

Downloadable files

A 41/2 digit DPMs for accurate measurement and display of a wide variety of analog input signals. Models available to measure:

Voltage and current, AC and DC
(Including True RMS)
Process signals scaled to display in engineering units
Thermocouple, RTD and thermisor temperature

Back to top

 

Model 2800 Series
Digital Panel Meter

Downloadable files

Microprocessor technology provides application versatility and excellent accuracy at an affordable price

Standard features include:

Fully prompted setup and data entry through front panel keypad
Automatic storage of max/min measurement data
Dual high/low setpoints with user-programmable hysteresis
SelfCal™ insures accuracy by sampling a precision internal reference every four seconds
Set-up data permanently stored in non-volatile memory
Lockout code for added security
High-intensity 0.5” blue-green vacuum fluorescent display
NEMA 12 sealed front panel
Compact 1/8 DIN case, 45mm x 92mm cutout
Input/Output connectors supplied
Dimensions: 2” (50.8mm) H x 3.83” (97.3mm) W x 5.36” (136.1mm) D

Back to top

 

Model D3100 Series Panel Instrumentation

Downloadable files

The D3100 Series is a low priced family of digital panel meters for industrial or laboratory measurement. These meters are standard with scaling, relay outputs, analog output, excitation and screw terminal connectors. Meter display is a ±1,999 count or ±19,999 count resolution LED display. This family of meters can measure all common transducer outputs. There are seven models from which to choose.

Bright LED Display
Two Relay Outputs
4 - 20mA or 0 - 10V Analog Output
Standard 1/8 DIN Cutout

Screw Terminal Connectors

Scalable
Seven Models to Choose From:
Voltage / Current
Process
Thermocouple (J & K)
RTD
Strain Gauge
True AC RMS Voltage / Current
AC Average Voltage / Current
All models are CE Approved

Back to top

 

Model D3200
Voyager Series

Downloadable files

 

5 digit, -19999 to +20999 red LED display
Display can be user programmed for 3½, 4 or 4½ digits
Microprocessor controlled A/D
Four front panel annunciators to display alarm status or status indicators for selectable functions
Universally powered from 100 to 132VAC, 200-264VAC and 10 to 40VDC

No calculation setup for scaling and offsetting. Simply enter input and display high and low values

Display format selection of:
- decimal point
- count by 1, 2, 5 or 10
- least significant “dummy” zero
- 3½, 4 or 4½ digit display
Selection for upper and lower limits that when exceeded will cause display to flash
Programmable A/D functions of:
- Update time from 10 per second to once every 20 seconds
- Averaging of programmable 1 to 25 input reading by walking window means
- Programmable window of measurements that can be allowed in the averaging function
User configurable non-linear 17 point correction
User programmable front keys and external input assignments.
Programmable alarm functions include:
- Each alarm programmable as:
Off
High alarm
Low alarm
Descending alarm
Deviation high alarm
Deviation low alarm
- Each alarm output is programmable for:
1. Normally open/normally closed
2. On delay – specifies minimum time alarm condition must be true before output is activated
3. Off delay – specifies minimum time alarm condition must be false before output is de-activated
- Full range programmable hystersis
- Latching operation
- Outputs may be assigned to input, net, peak #1 or peak #2
- Fail safe operation
- Alarm limits directly accessible from front panel
Max./min. peak detectors with capture delay (signal must be valid for this programmable amount of time to become a valid peak)
Second scale factor allows change of display to different engineering units. Typically English to Metric conversions
CE Approved

Password function allows lockout of access to programming functions without knowing programmed pass number

Quick zero and span adjustment from front panel
Excitation power supply
Slot on inside of front panel for displaying units of measure from furnished decal sheet
1/8 DIN cutout
Dimensions of 3.62" (92mm) wide by 1.73" (44mm) tall by 4.5" (114.5mm) long
NEMA 12 rated front panel
Screw terminal connectors
Operating temperatures of –10 to +60°C
Accuracy: .01%

Back to top

Model D3300 Series
Digital Panel Meter

Downloadable files

The D3300 Series is a compliment to the D3100 Series with the D3300 being a basic display meter without relay or analog outputs. All other features, size, specifications, etc. are the same as the corresponding D3100 meter. See D3100 for specifications, feature and options.

Back to top

 

D3400 Series

Downloadable files

 

Largest LED Display Available with .8'' high characters in a 1/8 DIN Panel Meter Package. Available in seven (7) different input models. Also with space savings compared to other panel meters with 2.4'' behind the panel.

3½ digit full-size LED, 0.56" high
Small size 1.9" x 4" x 1.115"
Only 0.5" required behind the panel
Auto-zeroing

Fits 1/8 DIN cutout

Programmable decimal
+5 VDC power
Connector included
Made in the USA

Back to top

 

Model D3500 Series
1/8" DIN Panel Meter

Downloadable files

 

The 4 model Series D3500 offers a maximum display reading of 5 digits (up to 32000 counts). Output options for the D3500 are: 2/4 relays, or 4NPN/4PNP control outputs, and an Analog (0-10VDC/4-20mA) output signal. Also the unit offers a choice of RS-232 or RS-485 communication with (Modbus, ISO1745, or DigiTec) protocol. The meter is easy to program with two types of scaling: (1) No calculation scaling (2) Load calibration. The D3500 has a standard warranty period of 3 years.

Process, Strain Gage, Temperature, Frequency
NEMA4 certified
12 point linearization
Clamp-Wago type Terminal Connectors
Front panel programmable decimal points
Two scaling methods (by no calculation or load calibration)
Optional: RS-232 or RS-485 communication

Optional: Analog 4-20mA or 0-10VDC output

Available in 4 different input models:
- Process
- Temperature
- Straingage
- Counter/Freq.
4 programmable REMOTE INPUTS
Available in models powered by 115/230VAC, 10-30VDC, 24/48VAC
3 YEAR WARRANTY

Back to top

 

Model D3600 Low Profile Digital Panel Meter

Downloadable files

 

The DigiTec D3600 Series of Low Profile Digital Panel Meters are the new 3/64 DIN compact size ideal solution for meeting the measurement and display requirements of industrial applications, OEM’s and system designers.

3/64 Din
.94” h x 2.83” w (24mm x 72mm)
-1999 to 9999 Digit, 0.56” LED Display
IP65/NEMA 4 Front Panel
Tare

Two Alarm Relay Output

85-264VAC Powered
Excitation Supplies
5/Sec Display Update Rate
Options: Analog Output, RS232 & Infra-Red Remote Setup

Back to top

 

Model D3700 Series Panel Instrumentation

Downloadable files

NEMA 4X. The D3700 series digital panel meters are the most versatile and powerful meters on the market. Available as either single or dual channel. It is the perfect choice for the most demanding applications.

NEMA 4X rated front
6 digit red LED display
Peak Capture model (-02) is 10,000 readings/sec. capture rate
60/sec. Update Rate
Integrating Totalizer

20 point linearization

Tare gross/net operation
Dual scale setup (English/Metric)
18VDC 50mA excitation supply
Math channel
1/8DIN extruded aluminum case
Shunt calibration
No calibration scaling
Calibrated load scaling
User definable defaults
User Programmable keys and remote inputs
Relay for alarm/shunt calibration

Back to top

 

Model D3900 Series
Four Channel Analog
Panel Meter with 5th
Math Channel


The D3924 series digital panel meters are the most versatile and powerful meters on the market. The meter's 6 digit display, high speed measurement (20/sec. update rate) makes this the perfect choice for those most demanding applications. The D3900 also includes 4 assignable front keys, 2 assignable remote inputs and a variety of menu lockout features. Combine all this with its good looks, industrialized aluminum case, NEMA 4X construction, 13 indicating LEDs, and snap-action buttons.

6 digit red LED display
20/sec. Update Rate
Tare gross/net operation
Dual scale setup (English/Metric)
Math channel
1/8 DIN extruded aluminum case
NEMA 4X rated front
Shunt calibration
No calculation scaling
Calibrated load scaling
User programmable keys and remote inputs
Relay for alarm/shunt calibration
Scan Mode (Selectable Scaning)

Back to top

 

Model 4000A Series
Intelligent Monitors and Controllers

Downloadable files

 

Ruggedly built, highly accurate panel monitors are well suited to a wide variety of testing, manufacturing and processing applications.

Prompted front panel keypad entry of setup data.
Displays measurement readings, averages, min/max readings, totals and other data at the touch of a key.
Exceptional accuracy of .005% ±1 digit.
Four user-selectable high and low limits, all with adjustable hysteresis. Each limit can be programmed to activate one of two internal, isolated open collector transistor outputs for ON-OFF control of alarms, switches, etc.
SelfCal™ autocalibration eliminates need for periodic recalibration.
Bright, vacuum fluorescent display with nine alphanumeric characters. Four characters available for assignment as display labels.

Rugged metal case designed to DIN panel mount specifications.

Oil-tight, drip proof NEMA 12 sealed front panel, 68mm x 158mm cutout.
Industrial circuit design – true differential input circuits are isolated, floated.
Options include analog or serial data output, adjustable 5 to 15VDC transducer excitation (standard on Strain Gage/Load Cell models), two additional open collector outputs, and external relay pack with four 10A relays.
Dimensions: 2.84" (72mm) H x 5.67" (144mm) W x 9.9" (251mm) D

Back to top

 

D5000 Series

Downloadable files

 

DigiTec's D5000 Series is ideal for measuring and displaying data from all applications. The NEMA 4 rating of the complete display including connectors makes it ideal for all industrial environments. The universal powered D5000 Series works off of any 95 to 265VAC supply.
Available in 2", and 4" and 6" models. Consult factory for 8" and 11" models.

Complete NEMA 4 rating
Operates off a 95 to 265VAC supply without need to re-configure
All models include a bidirectional RS485 interface
13VDC @ 50mA excitation supply

Panel, well or suspension mounting kit of users choice

2" and 4" displays are ultrabright, high efficiency and LEDs
Programming of displays is by 3 contact closures or serial input
4 selectable brightness ranges
10 year nonvolatile memory

Back to top

 

D5228/D5248/D5249 Series

Downloadable files

 

DigiTec's Marquee Displays are an economic solution to problems involving communication with workers at a distance. They can be used to display safety alerts, machine status, production counts and similar messages. They are S2 compatible devices that can operate with personal and single board computers, as well as Basic or ASCII modules of programmable controllers.

Viewing Range of 125 feet for 2" tall characters, up to 275 feet for 4.5" characters
Message options include blinking, horizontal and vertical scrolling and embedded variable data
Universal Mounting Brackets allow top, surface or suspended mounting
Units can be stacked together or mounted back to back for bi-directional viewing

Communicates using our S2 Protocol via optically isolated RS232 or RS422 ports

5A, SPDT Relay Alarm Output can be used to sound siren or strobe light

Back to top

 

D5600/5700 Series

Downloadable files

 

DigiTec's large displays are ideal for viewing important process or production measurements with digit heights of 57mm (2") or 102mm (4"), clearly visible up to 40 meters away.

CE approved
Low cost, attractive styling
Dual Alarms included as standard
RS422 retransmission output

Remotely Scalable

Excitation supply included
Universal Power Supply
High noise immunity
Wall or suspension mounting
Simple to install

Back to top