Solid State Timers

The 631 time delay begins when power is applied to the timer. Upon completion of the delay period, the load energizes. Reset during or after the delay period is accomplished by removal of the input voltage. The 631 will not false transfer if voltage is removed prior to completion of the delay period. A fast recycle time permits accurate, high speed, continuous operation.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages

Models 632 Solid State Output Off-Delay Timers

Back to top

.

Voltage is continuously applied to the input. An external isolated switch controls the timers. When closed, the load energizes. Opening the switch initiates the delay period. Upon completion of the delay period, the load de-energizes. If the control switch recloses during the delay period, the load remains energized and the timer resets to zero.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages
  

Models 633 Interval Solid State Output

Back to top

.

The 633 series is a two input terminal device that connects in series with the input and load.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages

Models 634 Interval Solid State Output

The 634 series is a three input terminal device.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages
  

Models 635 Single Shot

Back to top

Voltage is continuously applied to the input. An external isolated switch controls the timer. When closed (momentary or maintained), the load energizes and the delay period begins. Upon completion of the delay period, the load de-energizes.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages
  

Models 636 Delayed Interval

Back to top

Application of voltage to the input of the timer initiates the OFF time. Upon completion of the OFF time, the load energizes and the ON time begins. Upon completion of the ON time, the load de-energizes and the cycle is complete. Reset during or after the time periods is accomplished by removal of the input voltage. The OFF/ON time periods are independently adjustable.

• Totally encapsulated

• Timing Ranges from .1 Sec to 24 Hrs.

• Surface Mounted using .187" mtg. hole

• Solid State 1 Amp SPDT N.O. Output

• 24, 120, or 240VAC Supply Voltages

640 Series

The 640 series is a family of flashers and repeat cycle solid state totally encapsulated timers with 1/4" quick disconnect terminals for wiring. The 645 is an Energy Conservation timer for machine and motor control.

• Totally encapsulated

• 24, 100, or 240VAC Supply voltages

• Surface Mounted using .187" mtg hole

• Model 641 is a three input terminal flasher with equal ON and OFF timing operation.

Back to top

650 Series

Models 651, 652, 653, 654, 655, 657, 658 DIP Switch Timers0

	Model 651
	Model 652
	Model 653
	Model 654
	Model DE655
	Model 657
	Model 658

The 650 series is a family of plug-in DIP switch setting timers for exact setting of the preset times. All common operating modes and voltages are available in separate models. Output is a 10 Amp SPDT or DPDT relay.

• DIP switches for exact time settings

• 8-pin Octal or 11-pin Round Plug-in

• SPDT or DPDT 10 Amp Relay

• 12, 24, 48, 120, 240VAC or DC operation in separate models

• LED output indicator

• Six (6) different operating Models:
  #651 On-Delay
  #652 Off-Delay
  #653 Interval
  #654 Single Shot
  #655 Flasher
  #656 Repeat Cycle ON Time First
  #657 Repeat Cycle OFF Time First
  #658 Multi-Mode Operation

Back to top

Models 661, 662, 663, 664, 665, 666, 668, 669 Knob Adjustable Timers

The 660 series is a family of plug-in knob adjustable timers with standard operating modes. All common operating modes and voltages are available in separate models. Output is a 10 Amp SPDT or DPDT relay. Octal plug-in or blade bases available.
Back to top

	Knob adjustment with lock nut
	8-pin octal, 11-pin round, or 11-pin blade
	SPDT or DPDT 10 Amp Relay
	24, 120, 240VAC or DC operation in separate models.
	Nine (9) different operating Models: #661 ON-Delay Operation #662 OFF-Delay Operation #663 True OFF-Delay Operation #664 Interval Operation #665 Single Shot #666 Energy Conservation Timer #668 Flasher #669 Programmable Multi_Mode timer

670 Series

Models 671, 672, 673, 674, 675 Knob Adjustable Timers

The 670 series is a family of plug-in knob adjustable timers Repeat Cycle, Delayed Interval, Delayed Single Shot, and ON Delay/OFF Delay timers. Output is a 10 amp DPDT relay. Octal plug-in or blade bases available.

• Knob adjustment with lock nut

• 8-pin octal, or 11-pin blade base

• DPDT 10 amp relay

• 24, 120VAC or DC operation in separate models:
  #671 Repeat Cycle OFF Time First
  #672 Repeat Cycle On time First OFF
  #673 Delayed Interval Operation
  #674 Delayed Single Shot Operation
  #675 On Delay/Off Delay Operation

Back to top