ATC indicating tower lights are complete assemblies that include bulbs, pole, 90° mounting bracket and all hardware necessary for installation. The lights are ideal for indicating operating status in a wide range of process, assembly and other automatic equipment applications.

The S100 is available in red, amber, blue or clear lenses and can be base mounted or threaded onto a 3/4" pipe. The high intensity strobe light can be applied inside or outside and features an "O" ring gasket between lens and base plus sealed electronic circuitry. 120VAC and 12VDC—80VDC models are standard as are base mounted or magnetic base for non-permanent mounting. A protective wire frame guard accessory is available for high damage risk installations.

The lens is molded of tough polycarbonate and features computer designed optics that assure a wide band 360° horizontal and vertical flash burst.

The combination of material and design make the S100 ideal for industrial equipment even refrigerated areas as well as outdoor vehicles and equipment.
Back to top

Model TL tower lights are a unique design based on the refraction principal. Light from the LEDs passes through computer designed dual prism which refracts the beams. The light does not bounce off or reflect off a polished surface. As a result, TL lights provide a more even beam disbursement with few if any "hot" spots. After passing through the prisms, the light is dispersed or diffused by the lense which is vertically ribbed on the inside and horizontally ribbed on the outside. The result is not only a bright easily visible light but one with a very uniform illumination spread throughout the lense.

The Model ST5 family of indicating tower lights consist of 1, 2, or 3 lamp models. They are heavy duty industrial units that feature a large 2" diameter lens columns and 10 watt bulbs for long distance viewing. The lamp column is atop a 10" long pole which is chrome plated as is the "L" shaped mounting bracket supplied with each unit. Replacement bulbs are available locally or from ATC. ST5 lights are available in steady or non-flashing models only.

The KCL-5M, AC current monitoring light indicates current flow to motors, heaters or other current application devices by induction. Typical indicating lights signal only that the switch function has been performed and it has provided power to the light. It does not indicate that the device being powered is drawing current.

The KCL-5M provides indication that the device being monitored is drawing current. The cost of scrap, lost time, or damage to equipment resulting from a non-running motor or malfunctioning heater can be greatly reduced with the installation of an ATC KCL-5M.

The KA-ST2 family of Tower Indicating Lights are miniature in size, with a base and lens diameter about the same size as a 25 cent piece. The base to lens column is made of satin finished aluminum which adds to the aesthetic appearance of the indicating light assembly. The mini lights are available in steady light performance only and can be supplied in one through four light models.
Back to top