FGR-Series OEM Modules

900 MHz Spread Spectrum Wireless Radios
FGR-series board level OEM module
Click to enlarge
Common features of the FGR series:

The FGR family is the latest improvement in our line of products, with features including:

Particular features of these radios:

Specifications
Radio link:
      Frequency Range 902-928 MHz
      Method Frequency hopping spread spectrum
      Hopping Patterns 15 per band, 105 total, user selectable
      Hopping Channels 50 to 112, user selectable
      Hopping bands 7, user selectable
      Range, Line-of-sight 60 miles
      Occupied Bandwidth 230 KHz
      Modulation GFSK, 144 ~ 188 Kbps
      RF Connector Type SMA
      System Gain 140 dB
Transmitter:
      Output Power 100 mW to 1 Watt (+30 dBm)
Receiver:
      Sensitivity -108 dBm for 10-6 BER
-110 dBm for 10-4 BER
      Selectivity 20 dB at fc ±± 115 KHz
60 dB at fc ± 145 KHz
Data Transmission:
      Error Detection 32 bit CRC, retransmit on error
      Data Encryption Substitution, dynamic key
      Link Throughput** 115.2 Kbps standard speed, 38.4 Kbps low speed
** Uncompressed , measured assuming 75% frequency availability
Data Interface:
      Protocol Either RS-232/RS-422/RS485, or TTL,
1200 Baud to 115.2 KBaud, DCE
      Connector 10-pin PCB header
Diagnostics Interface:
      Connector Separate 20-pin PCB header
Power Requirements:
      Voltage 6 to 30 Vdc
      Current [mA]
  6 Vdc 12 Vdc 30 Vdc
Transmit 1000 500 200
Receive 152 86 43
Idle 40 21 12
Sleep 8 6 3
Environment and mechanical:
      Operating tempertature -40 °C - +75 °C
      Dimensions
      (single board)		 127 L x 61 W x 18 H [mm]
5.0 L x 2.4 W x 0.71 H ["]
      Weight
      (single board)		 74.4 g
2.6 oz
 
Ordering Info
Model Interface RF Connector UL approved
FGR-511X006 TTL none  
FGRO9TS TTL SMA  
FGRO9CA RS232/422/485 none  
FGRO9CS RS232/422/485 SMA  
FGRO9CSU RS232/422/485 SMA Yes
FGR-5013008* RS232/422/485 SMA  
FGRO9SE* Ethernet SMA Yes

* 2 sandwiched boards