I-Series OEM Module

2.4 GHz Spread Spectrum Wireless Radios 
FGR-series board level OEM module
The I-series OEM board level radios provides outstanding performance and functionality in a small footprint ideal for OEM applications. All versions of the radio are available with either TTL level or full RS-232 interface.
 
The radios are preset with an electronic serial number and all options are selectable through any terminal program. They can operate in Point-to-Point or Point-to-Multipoint modes or as a store and forward repeater for either mode. To help meet specific needs, a TDMA protocol is also available.
 
Available in a rugged or waterproof enclosure.  

 

Specifications

Radio link:
      Frequency Range 2.400 to 2.4835 GHz
      Method Frequency hopping spread spectrum
      Range, Line-of-sight 20 miles (with 5 dB omnidirectional antenna)
      Occupied Bandwidth 230 KHz
      Modulation GFSK, 120 ~ 170 Kbps
Transmitter:
      Output Power See below
Receiver:
      Sensitivity -105 dBm at 10-6 raw BER
      Selectivity 40 dB at fc ± 230 KHz
60 dB at rfc ± 460 KHz
Data Transmission:
      Error Detection 32 bit CRC, retransmit on error
      Data Encryption Substitution, dynamic key
      Link Throughput** 115 Kbaud
** Uncompressed , measured assuming 75% frequency availability
Data Interface:
      Protocol RS-232 or 0 to 5 V TTL,
1200 Baud to 115.2 KBaud, DCE
      Connector 10-pin PCB header
Diagnostics Interface:
      Connector Separate 20-pin PCB header
Power Requirements:
      Voltage See below
      Transmit Current See below
      Receive Current 100 mA at 12 Vdc
      Idle Current 65 mA at 12 Vdc
Environment and mechanical:
      Operating tempertature -40 °C - +75 °C
      Dimensions 127 L x 61 W x 18 H [mm]
5.0 L x 2.4 W x 0.71 H ["]
      Weight 74.4 g
2.6 oz
 
Ordering Info
Model Interface RF Connector Supply Voltage Output Power Transmit Current
I-510X006 TTL none 9.5 to 30 Vdc 500 mW
(+27 dBm)
at 9.5 Vdc
325 mA
at 12 Vdc
I-510X007 TTL Reverse SMA
I-510X008 TTL SMA*
I-520X007 RS232 Reverse SMA
I-520X008 RS232 SMA*
I-521X007 RS232 Reverse SMA 6.5 to 30 Vdc 300 mW
(+26 dBm)
at 7.5 Vdc
600 mA
at 8.5 Vdc
* Straight SMA connector available only to US Military and for export